RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 51)

51
Procedure:
• Enter <
Devices>
parameter group as described in chapter
16 of the manual,
• Choose „
Computer
/
E2R System / System is active”
and then set an appropriate value.
Accessible settings:
- System is not active
- System is active
• If during cooperation with <
E2R System>
product selection lock
is required for operators, go to parameter <
Lock selecting
products>
and set its value to .
• Active connection with the computer software is indicated by additional
information displayed in the upper bar of the software:
Where:
- parameter active <
System is active>
- active connection with a computer software
16.2. Printer
In <
Printer>
submenu users can:
• Setting communication with a printer,
• Setting code page of a printer,
• Setting templates of printouts.
To enter <
Printer>
, press and then
:
„ Printer”