RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 213)

213
37.4. WE 8 - 8 inputs / 8 outputs module
8 inputs / 8 outputs PCB - WE 8
WE 8
modules can be connected as an alternative to the module of analogue
output and relay module. Its task is to expand the functionality
of an indicator for 8 inputs and 8 outputs freely configurable. It expands
functionality of terminals. It comprises on board optoinsulated inputs
and outputs freely configurable from the level of indicator.
Caution:
If WE 8 module is installed in it does not allow to install AN analogue
output module and/or PK 1 module of relays
.
37.4.1. Technical specification
Parameters of outputs
Quantity of outputs 8
Type of outputs Reed operation contacts
Wire diameter 0,14 - 0,5mm
2
Maximal load-current contact capacity 0,2A DC
Maximal forward voltage 50V DC
Parameters of inputs
Quantity of inputs 8
Input type Optoinsulated
Wire diameter 0,14 – 0,5mm
2
Control voltage range 5 -24V DC