RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 97)

97
Printing followed by zeroing label counter or the total mass
Printing without zeroing label counter or the total mass
By default setting button is accessible in the bottom part of the
display but activating the button can be done in submenu:
„ / Display / Actions”
(see ch. 17.2 of the manual).
For automatic printout of cumulative labels counters and total mass
variables are always zeroed.
• Confirm the changes by pressing and go to parameter
< Threshold>
then <Threshold> window appears with the screen
keyboard,
• Set the appropriate value for automatic triggering cumulative labels:
−
If parameter <
Mode>
is set to <Mass> then enter the required
value of total mass to exceed in order to print the C label,
−
If parameter <
Mode>
is set to <Number> use the screen
keyboard to enter the required counter value as a threshold to
trigger off printing C labels.
• Confirm the changes introduced by pressing .
24.6.5. Automatic triggering cumulative labels of cumulative labels
Users have access to the function of automatic triggering of printing
cumulative labels of cumulative labels after setting parameters
< Mode>
and <
Threshold>
.
Procedure:
• Enter <
Working modes>
parameter group as described
in chapter 24 of the manual,