RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 139)

139
Notice:
In order to carry out a product control using “non-destructive average tare”
mode, in accordance with the regulation on standard deviation “S”, the mass of
packages is determined from at least 10 measurements, and the standard deviation
can not be greater than 0.25 of the maximum permissible negative error T for
nominal mass of a package.
If an operator carries out the last measurement of the packaging mass, the software
displays a summary of the process. Automatically, the system generates a report is
saved in the scale database:
Pressing
key causes moving to the control process without saving the
determined average mass of a packaging in product record in the database.
Pressing
key causes moving to the control process with simultaneous
saving the determined average mass of a packaging in product record in the
database.
During the control process in progress the software carries out real-time updating of
measurement results and displays them in the corresponding fields for informing an
operator on control result: