RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 224)

224
39. TECHNICAL PARAMETERS
PUE HY
Housing stainless steel
Display 5,7” with resistive touch panel
Power Supply 100-240VAC 50-60Hz
Optional power supply External 10-24VDC 2A
Operation Temperature -10°C to 40°C
OIML class III
Number of verification intervals 6000
Max. change of input signal 19.5mV
Max. Voltage per verification interval 3.25µV
Min. Voltage per verification division 0.5µV
Min. impedance of tensometer 80 Ω
Max. impedance of tensometer 1200 Ω
Tensometer excitation voltage 5V
Load cell connectivity 4 or 6 wires + shield
Number of platform Max. 4
RS232 Standard
USB Standard
Ethernet Standard
3IN/3OUT (inputs/outputs) Standard
Multi-range possibility yes
40. ERROR MESSAGES
Err2
- Value beyond the zero range,
Err3
- Value beyond the tare range,
Err8
- Tarring / zeroing operation time exceeded,
NULL
- Zero value from the AD converter,
FULL
- Measurement range overflow,
HI
Display range overflow,
LH
- Start mass error, the mass on the weighing platform is
beyond the acceptable range (-5% to +15% of start mass)