RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 46)

46
Accessible settings:
Always
- Last digit always visible
Never
- Last digit always switched off
When stable
- Last digit visible only on stable indication of mass
15. COMMUNICATION
The scale can communicate with external devices via different ports:
• RS232 (1),
• RS232 (2),
• Ethernet,
• Tcp.
The communication can be configured in parameters’ group
<
Communication>
.
In order to enter <
Communication>
, press and then
:
„ Communication”
.
15.1. RS 232 settings
Procedure:
• Enter <
Communication>
according to ch.15 of the manual, select
< RS232 (1)>
or <
RS232 (1)>
, and then set an appropriate
value.
For RS 232 following parameters are accessible:
• Baud Rate - 4800, 9600, 19200, 38400, 57600, 115200 bit/s
• Data bits - 5, 6, 7, 8
• Stop Bit - No, 1, 1.5, 2
• Parity - No – Odd – Even – Mark – Space