RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 82)

82
21.2. Setting date and time
Users can set date and time that are visible in the main window of the
display. Entering the edition of date and time can be made in two ways:
• Pressing the field „date and time” in the top bar of the main screen,
• Pressing button and then
:
„ Others / Date and Time”
.
After entering the setting of date and time the screen keyboard appears.
Set year, month, day, hour, minutes and confirm by pressing
.
Notice:
Parameter < Date and Time> is accessible in the scale menu depending
on the authorization access level set in the related parameter.
21.3. Sound signal
Procedure:
• Enter <
Others>
according to ch. 21 of this manual, <
Beep>
and set accordingly.
Settings:
No
- Beep disabled
Yes
- Beep enabled
21.4. Touch panel calibration
Touch panel calibration is required when inappropriate operation is
recognized. E.g. the reaction in a different place than the touching point.
Procedure:
• Enter submenu <
Others>
according to ch. 21 of this manual,
• Select <
Touch Screen Calibration>
and then an editing field
appears,