RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 91)

91
Formulation
CPG
Weighing animals
Density
Work modes can be configured in <
Working Modes>
.
To enter submenu <
Working Modes>
, press and then
:
„ Working Modes”
.
The settings of specific working modes provide access to special functions
adjusting operation of the instruments to client’s individual needs.
Notice:
1. First left screen button (local settings) in the main window of
every working mode is ascribed to access settings of current mode.
2. The change in on mode results in the same change for other working
modes working modes.
Part of the special functions have global effect, i.e. they are applicable
to most of accessible working modes (except for working modes: Formulation,
Dosing), as presented on below table:
Weighing Parts
counting
Percent
setup
Weighing
animals Density
CPG
Save Mode + + + - + +
Down-weighing + + + - - -
Checkweighing + + + + + -
Tare mode + + + + + -
Labelling mode + + + + - -
Statistics + + + + + +
Peak hold + - - - - -
Other special funcions are related directly to a specific working mode, and
they are described in further part of this user manual.