JLG 1250AJP Service Manual - Manual (Page 164)

SECTION 3 - 1CHASSIS & TURNTABLE
3-116 – JLG Lift – 3121171
Removal
1. Disconnect the battery.
2. Use a tie strap as shown below to secure the hood
support when the hood is being removed.
3. Remove the bolts and clamps that secure the engine
hood assembly to the hood support.
4. Carefully lift the engine hood assembly away from
the machine.
NOTE: The engine hood assembly weighs approximately 84
lbs. (38 kg).
5. Using an adequate lifting device, support the weight
of the hood support. Disconnect the gas springs
and remove the bolts and washers that secure the
hood support to the hinges.
NOTE: The hood support weighs approximately 134 lbs. (61
kg).
6. When all of the bolts are removed, lift the hood sup-
port away from the machine.
7. Remove the bolts securing the pump assembly.