JLG 1250AJP Service Manual - Manual (Page 75)

SECTION 3 - 1CHASSIS & TURNTABLE
3121171 – JLG Lift – 3-27
1. Install the special tool (6689960310) on the flanged
hub (31) and turn the screw until it compresses the
springs (45).
2. Remove the circlip (47) and remove the special tool.
3. Remove the spring retainer disc (46).
4. Mark the position of the springs (45) as a reference
for the reassembly.
5. Remove the springs (45) from their seats in the
brake piston (44).
6. By using pliers remove the circlip (36) from its seat
in the brake shaft (35).