JLG 1250AJP Service Manual - Manual (Page 289)

SECTION 4 - BOOM & PLATFORM
3121171 – JLG Lift – 4-49
Figure 4-37. Boom Sensor Locations - Level & Jib Position Switches
POSITION THE JIB SWITCH MOUNT TO ACHIEVE
0.000" - 0.030" (0.00mm - 0.79mm)
CLEARANCE BETWEEN SWITCH ROLLERS
AND ROTATOR CAM
JIB CENTER SWITCH TO ACTIVATE
WHEN JIB IS ROTATED 10° ± 1° BOTH
DIRECTIONS FROM CENTER
JIB STOW SWITCH TO ACTIVATE WHEN JIB ROTATES 70°
TOWARDS RIGHT SIDE OF MACHINE FROM CENTER
TYPICAL ON LEFT & RIGHT
SIDE OF BOOM
JIB SWITCH DETAIL
LEVEL SENSOR DETAIL
SENSOR COVER
PUSH NUT DETAIL PUSH NUT
SENSOR
MOUNT
MOUNTING
BOLT
SEE PUSH NUT DETAIL
0273121-M