JLG 1250AJP Service Manual - Manual (Page 310)

SECTION 4 - BOOM & PLATFORM
4-70 – JLG Lift – 3121171
13. Press the ENTER key. The control system will per-
form the following checks:
The axles must be extended or the DOS (Direction of
Steering) switch must indicate the turntable is
between the rear tires, otherwise the analyzer will
read:
14. If the main boom angle sensors are calibrated and
working properly the control system will verify the
main boom angle readings are between +0.0 and
+15.0 (ref tower boom). If they are calibrated and
working properly and outside the angle limits, the
analyzer will read:
15. After the successful completion of the checks, the
analyzer will read:
16. Enter code 74466. The analyzer will read:
WHEN THE STABILITY CONTROL IS OFF THE MACHINE WILL TIP
IF USED INCORRECTLY.