JLG 1250AJP Service Manual User Manual

Page 529

Advertising
background image

SECTION 6 - JLG CONTROL SYSTEM

3121171

– JLG Lift –

6-97

9910

99

10

FUNCTIONS LOCKED OUT - PLATFORM MODULE SOFT-
WARE VERSION IMPROPER

The Platform Module soft-
ware version is not compat-
ible with the rest of the
system.

9914

99

14

PLATFORM MODULE SOFTWARE UPDATE REQUIRED

The Platform Module soft-
ware requires an updated.

9915

99

15

CHASSIS TILT SENSOR NOT GAIN CALIBRATED

The Chassis Tilt Sensor
gain calibration has been
lost.

9916

99

16

CHASSIS TILT SENSOR GAIN OUT OF RANGE

The Chassis Tilt Sensor
gain calibration has
become corrupted.

9917

99

17

HIGH RESOLUTION A2D FAILURE - INTERRUPT LOST

The Platform Module has
reported that its ADS1213
chip has stopped asserting
its interrupt.

9918

99

18

HIGH RESOLUTION A2D FAILURE - REINIT LIMIT

The Platform Module has
reported that its ADS1213
chip had to be reset 3 or
more times.

9919

99

19

GROUND SENSOR REF VOLTAGE OUT OF RANGE

The Ground Module has
reported that its sensor ref-
erence voltage is outside
acceptable range.

- Not reported during power-
up.

9920

99

20

PLATFORM SENSOR REF VOLTAGE OUT OF RANGE

The Platform Module has
reported that its sensor ref-
erence voltage is outside
acceptable range.

- Not reported during power-
up.

9921

99

21

GROUND MODULE FAILURE - HIGH SIDE DRIVER CUT-
OUT FAULTY

The Ground Module has
reported that its high side
driver cutout failed.

9922

99

22

PLATFORM MODULE FAILURE - HWFS CODE 1

The Platform Module has
reported that the V(Low)
FET has failed.

9923

99

23

GROUND MODULE FAILURE - HWFS CODE 1

The Ground Module has
reported that the V(Low)
FET has failed.

9925

99

25

FUNCTIONS LOCKED OUT - CHASSIS MODULE SOFT-
WARE VERSION IMPROPER

The Chassis Module soft-
ware version is not compat-
ible with the rest of the
system.

9926

99

26

FUNCTIONS LOCKED OUT - BLAM MODULE SOFTWARE
VERSION IMPROPER

The BLAM software ver-
sion is not compatible with
the rest of the system.

9927

99

27

GROUND MODULE CONSTANT DATA UPDATE
REQUIRED

The Ground Module con-
stant data requires an
updated.

Table 6-6. Diagnostic Trouble Code Chart

DTC

Flash

Code

Sequence

Fault Message

Fault Description

Check

Advertising