JLG 1250AJP Service Manual - Manual (Page 79)

SECTION 3 - 1CHASSIS & TURNTABLE
3121171 – JLG Lift – 3-31
19. Remove the cap nut (5).
20. Remove the pin (3).
21. Remove the O-ring seal (2) from its seat in the end
cover (7).
22. Unscrew the draining-filling-level oil plugs (6) by a
male hex head wrench.
23. Unscrew the 10 screws M10X25 (1), grade 12,9,
from the end cover (7).
24. Remove the end cover (7).