JLG 1250AJP Service Manual - Manual (Page 318)

SECTION 4 - BOOM & PLATFORM
4-78 – JLG Lift – 3121171
If the tower boom length sensors are calibrated and
operating properly, the control system will verify the
tower boom length readings are less than 6 in. (15.2
cm). If the tower boom length is not within the limits,
the screen will read:
13. When the machine passes all the configuration
checks, the screen will read:
14. Enter code 55050. The analyzer will read:
WHEN THE STABILITY CONTROL IS OFF THE MACHINE WILL TIP
IF USED INCORRECTLY.
15. Press the ENTER key to acknowledge the stability
control is turned off. The analyzer should read: