N o t e – ETC Unison DRd Dimming Rack Enclosure User Manual
Page 34
Advertising
30
DRd Enclosure Installation Manual
Step 5:
Strip the neutral wire to the length indicated in the table above and terminate to
the neutral terminal assembly. Torque to the recommended value also indicated
in the table above. For 230V AC DRd enclosures, the neutral bus is located on
the line input feed side of the enclosure.
Step 6:
Strip the ground/earth wires to the length indicated in the table above and
terminate to the ground bus terminal. Torque to the recommended value also
indicated in the table above.
N o t e :
Ground connections must use all metal nuts and lock washers.
Advertising