ETC Unison DRd Dimming Rack Enclosure - Manual (Page 8)

4 DRd Enclosure Installation Manual
• The use of a station power module provides power and control for architectural control
stations.
• Use an Echo Station Power Module (E-SPM) to provide power for up to 16 Echo
control stations when used with the Echo ACP.
• Use a SmartLink Station Power Module (S-SPM) to provide power for up to 16
SmartLink control stations when used with the SmartLink ACP.
• Use a Paradigm Station Power Module (P-SPM) to provide power for up to 32
Paradigm control stations when used with the Paradigm ACP.
• The 0-10V control option (DRd-FLO) provides up to 24 outputs for control of 0-10V
(4-wire) LED drivers or fluorescent ballasts (up to 12 on a DRd6).
• The Digital Addressable Lighting Interface (DALI) option controls up to 24 loops of 64
DALI compatible ballasts or drivers in a broadcast mode (up to 12 on a DRd6).
• The Unison BatteryPack option provides power back-up to the Architectural Control
Processor in the DRd for a period up to 90 minutes.
• The Unison RideThru option provides power to the Architectural Control Processor in
the DRd for at least 10 seconds during brief power outages or drop outs.
• All empty module spaces in a DRd enclosure must be filled with airflow module or blank
modules (DRd-BM) for proper cooling.
• The DRd pedestal (DRd-PED) is a floor mounting stand for the DRd enclosure.