Garland GF SENTRY SERIES GAS RESTAURANT RANGES - Manual (Page 12)

Part # 4525587 Rev 4 (29 April 14) Page 12
The appliance pressure regulator provided by the factory
is pre-set to the correct manifold pressure. The manifold
pressure may require verifi cation and adjustment at the
installation. Allow at least one burner to be ignited and
operating while checking manifold pressure at the test
spigot located on the appliance manifold, and adjust the
appliance pressure regulator accordingly.
The appliance and its individual shut-off valve must be
disconnected from the gas supply piping system during any
pressure testing of that system where pressures are in excess
of 1/2 PSIG (3.45kPa.)
Final Preparation
NOTE: Your new range has a plastic coating to help protect
the fi nish from scratches during shipping. This protective
plastic fi lm should be peeled off prior to starting the range.
Optional Interconnect Gas Kit
To interconnect range mount salamanders with range
The GF series Garland range can be equipped with a range
mount gas salamander. Salamanders can be plumbed
independently or be interconnected with the range. See
Drawing for various options for mounting onto a 36”
(900mm) a 48” (1200mm) or a 60” (1500mm) range.
INSTALLATION Continued
MARK HOLE LOCATIONS AND MOUNT
SUPPORT BRACKET (ITEM 6 - 2640700) TO RANGE
BACK WITH (2)#10-16 TEKS SELF-DRILL/TAP
SCREWS (ITEM 11 - F67 - NOT SHOWN) PROVIDED.
ATTACH SUPPORT CLAMP (ITEM 7 - 2640800)
TO SUPPORT BRACKET ( ITEM 6 - 2640700)
WITH (2)#10-24 SELF-TAPPING SCREWS (ITEM 12
F32 - NOT SHOWN) PROVIDED.
15
5
2
9
1
4
10
14 3
8
13 REGULATOR - 4.5" w.c. NATURAL GAS
OR 10.0" w.c. PROPANE GAS
(SUPPLIED WITH RANGE)
REGULATOR - 6.0"w.c. NATURAL GAS
OR 10.0"w.c. PROPANE GAS
(SUPPLIED WITH SALAMANDER/
CHEESEMELTER)
TO INLET OF SALAMANDER/
CHEESEMELTER MANIFOLD
2
2
3
SUPPLIED WITH RANGE
SUPPLIED WITH RANGE
5
CUT TUBING (ITEM 15 - 4531608) TO SIZE AS REQUIRED
TO SUIT SALAMANDER/CHEESEMELTER TOP OR REAR
MANIFOLD INLET CONNECTION
6 7
TO INLET OF RANGE
MANIFOLD
1" NPT GAS SUPPLY
CONNECTION
15 4531608 3/4" X 51" X 33" TUBING 1
14 G01738-11 3/4" NPT X 3.5" PIPE NIPPLE 1
13 2127503/2127500 6.0"wc 3/4"NPT REG. NATURAL GAS/10"wc 3/4" NPT REG. PROPANE GAS - SUPPLIED WITH SALAMANDER/CHEESEMELTER 1
12 F32 SCREW-10-24X1/2" PAN HD SELF-TAP TYPE F (NOT SHOWN) 2
11 F67 SCREW - #10-16 X 1/2" HEX WASHER HEAD TEKS SELF DRILL/TAP (NOT SHOWN) 2
10 G03716-1 3/4" NPT X 3/4" NPT X 1" NPT REDUCING TEE 1
9 G01738-5 3/4" NPT X 6.5" PIPE NIPPLE 1
8 G01474-9 3/4" NPT X 1/2" NPT 90 DEG. REDUCING ELBOW 1
7 2640800 PIPE SUPPORT BRACKET CLAMP 1
6 2640700 PIPE SUPPORT BRACKET 1
5 3013000 3/4" CC X 3/4" NPT STRAIGHT FITTING 2
4 G01963-1 3/4" NPT PIPE UNION 1
3 G01474-5 90 DEGREE ELBOW 3/4" NPT (ONE SUPPLIED WITH RANGE) 2
2 G01738-14 3/4" NPT X 2IN PIPE NIPPLE (ONE SUPPLIED WITH RANGE) 3
1
NAT: 2127502/4525047
PRO: 2127500/4525048 4.5"wc 3/4"NPT/3/4" ISO 7-1 REG. NATURAL GAS OR 10"wc 3/4"NPT/3/4" ISO 7-1 REG. PROPANE GAS - SUPPLIED W/RANGE 1
ITEM NO. PART NUMBER DESCRIPTION QTY
Optional Interconnect Gas Kit
36in (900mm) G/U/X
Part # 4531606