HYDAC CSI-F-10 - Manual (Page 110)

GSM Radio Module CSI-F-10 Page 110
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
10 Error Messages CM Program Compilation
In order to ensure as high a degree of operational safety as possible, the CM program
generated will be checked for possible programming errors before it is transferred into
the device. If the system detects one or more such programming errors, then the
following message will appear and the CM program will not be transferred in the
CSI-F-10.
The menu function [CM Program / Display] (see Chap. 8.1.2) can be used in such
cases to have a more detailed program evaluation displayed, together with error
messages, and to have this printed out as needed.
Work through all of the error messages in your CM program and then transfer the
program once again into your CSI-F-10.
The following list shows all of the error messages that could occur during
programming, together with the associated function groups present in CMWIN, and
their causes.