HYDAC CSI-F-10 - Manual (Page 32)

GSM Radio Module CSI-F-10 Page 32
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
6.3.2.3 Connecting to the sensor by connection 2 (HSI address "b")
• Click on "Disconnect" under Connection in the Device box to break the existing
PC connection with the CSI-F-10.
• The following window opens:
• Then click on "No", so that the bus master is not reactivated.
• (!)
1
see Page 30
• Select Change in the Bus address line.