HYDAC CSI-F-10 - Manual (Page 45)

GSM Radio Module CSI-F-10 Page 45
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
6.5.1 Device connection
• Connect your PC with a standard GSM modem and make sure the device is
ready for operation.
• Insert a valid SIM card into the CSI-F-10 GSM radio module
(see Chap. 6.1).
• Connect the voltage supply to the CSI-F-10 GSM radio module according to the
diagram.
6.5.2 Connection Setup
• Start the HYDAC PC software CMWIN
• In the Units Menu, select the "CM Manager" option.
• If the Connection window does not open automatically, select
"Connection" in the menu bar of the CM Manager.
• Select the option "Modem Connection" option in the window that opens.
• Click on "Change" in the top line to open the window for the interface settings.
10.5..35 V DC / 3.5 A
GSM
1 2 3 4 5
PIN 5
Not to connect!