HYDAC CSI-F-10 - Manual (Page 13)

GSM Radio Module CSI-F-10 Page 13
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
3 Proper/Designated Use
The GSM radio module CSI-F-10 is an electronic unit with universal application for
transferring data and digital signals via the GSM mobile radio network. The device can
be used in both stand-alone operation and as a GSM modem on a CMU 1000 (HYDAC
Condition Monitoring Unit).
A maximum of two HYDAC SMART sensors with HSI interface (automatic sensor
recognition), e.g. HYDACLab
® , AS 1000 or CS 1000, can be connected to its input
connections.
In addition, several other system statuses can be monitored via the four integral digital
inputs and transmitted in binary using the two integral digital outputs. The device can
also access the machine / system being monitored directly via these digital outputs.
The sensor values, statuses etc can be requested by SMS/text. To do this an SMS with
the text "Values" must be sent to the CSI-F-10. The device then automatically sends
one or several reply text messages containing all the sensor values and additional
information available.
Note!
The GSM radio module CSI-F-10 only replies or accepts data connections if the
telephone number of the sender is visible and has been registered in the authorized
telephone numbers in the CSI-F-10 (see Chap. 7.1.4).
The CSI-F-10 devices are designed for use in difficult conditions. They are therefore
suitable for direct installation in machines and systems and in stationary and mobile
off-highway applications (not for public road and rail transport!).
The inputs and outputs are designed to a special specification for such applications.
Integrated hardware and software functions (operating system) provide a greater level
of protection for the machine.
Examples of possible applications:
Remote parameterization of HYDAC Condition Monitoring units and sensors in
stationary or mobile machines and systems
Remote diagnostics of system conditions
Transmission of alarm messages as SMS
Read-outs of operating conditions from machines that are running
...
Warning!
The device may be used only for the types of applications specified in the manual and
only in connection with accessory components authorized by HYDAC ELECTRONIC
GMBH. The trouble-free and safe operation of the product is contingent on proper
transport; storage, setup and installation; and on careful operation and maintenance.