HYDAC CSI-F-10 - Manual (Page 9)

GSM Radio Module CSI-F-10 Page 9
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
1 General
This manual is a constituent part of the device. It contains texts and graphics
concerning the correct handling of the product and must be read before installation,
assembly and the operation of the device.
The manual offers information concerning the safe operation, installation and
programming of the GSM radio module CSI-F-10. It is aimed at engineers,
programmers, fitters and maintenance personnel with a general knowledge of
automation technology.
By using this manual as recommended, you will ensure that the CSI-F-10 is put into
effective and safe operation as quickly as possible. The following questions are
covered in the next few points:
What prior knowledge must one have in order to be able to program the
CSI-F-10?
How is this manual structured?
What's the best way to use this manual?
What information can I find in this manual?
1.1 Previous Knowledge
No special previous knowledge is required for using and programming the CSI-F-10
GSM radio module.
A general knowledge of automation technology or memory-programmable controllers
and a knowledge of control technology or PLC programming will however be
advantageous and speed up the familiarization period.
1.2 Structure of the Manual
We have integrated a variety of different Help functions to make it easier to use this
manual. Please consult the Table of Contents to find a specific topic. A brief overview
is provided at the beginning of each Chapter listing the contents of that particular
Chapter.
Selective Reading
You will find notes in the side margins that make it easier to find particular sections.
Pictograms and markings are also given, and these are explained below.
Furthermore, this manual also contains instructions regarding personal safety and the
avoidance of property damage that must be observed. The instructions are highlighted
by a Warning symbol and displayed as follows, depending on the seriousness of the
hazard: