HYDAC CSI-F-10 - Manual (Page 55)

GSM Radio Module CSI-F-10 Page 55
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
• Select the HSI address of the CMU 1000 connected to the CSI-F-10 in the
selection window (Address a in our example).
• Afterwards, click on Switch on in order to switch on the pass-through mode for
the selected channel.
• The following message appears:
• Confirm this with OK.
• Afterwards click on Connect to connect the PC to the CMU 1000 that is
connected with the CSI-F-10