HYDAC CSI-F-10 - Manual (Page 16)

GSM Radio Module CSI-F-10 Page 16
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
5 Setup and Function
The GSM radio module CSI-F-10 is an electronic device with universal applications for
transmitting data and digital signals over the GSM mobile radio network.
A maximum of two HYDAC SMART sensors with HSI interface (automatic sensor
recognition), e.g. HYDACLab
® , AS 1000 or CS 1000, can be connected to its input
connections.
5.1 Display elements / Connections
4x LED red: 2x LED yellow: 2x LED green:
reception strength user configuration status sensor recognition
GSM network via CM program GSM activity
GSM antenna
In / Out socket:
Dig. Input 1, 2, 3, 4
Dig. Output 1, 2
with supply
Power connection: Sensor 1: Sensor 2:
voltage supply. AS 1000 / CS 1000
HSI-Master HYDACLab ®
HSI + supply HSI + supply
LED
Color Condition Meaning
On
4 LEDs: reception strength > 75 %
3 LEDs: reception strength > 50 %
2 LEDs: reception strength > 25 %
1 LED:
reception strength < 25 %
High

Low
red
All Off No reception
On Not registered
Rapid flashing Communication GSM green
Slow flashing Registered
On Min. 1 sensor recognised
Flashing PC connection active Status green
Off No sensor recognised
Signal 1 yellow On / Off
Signal 2 yellow On / Off
Function according to CM program
(programmable user application)
In the initialization phase (approx. 10 sec.) the LEDs will not indicate any defined
condition.