HYDAC CSI-F-10 - Manual (Page 79)

GSM Radio Module CSI-F-10 Page 79
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
8.2 Window Divisions
The graphics interface of the CM Editor is divided into the following elements:
8.2.1 "Function Properties" Window
The properties of the functions currently selected in the CM program are displayed in
this window. These include:
• Function name (e.g. Action 2; Constant 5; Measured value 12)
• Function type (e.g. Constant, Measured value, Time Sensor)
• Specific properties (parameter settings)
• Comment
8.2.2 "Function List" Window
This window lists all the functions used in the CM program with the following
specifications:
• Function type (e.g. Constant, Measured value, Time sensor)
• Function name (e.g. Action 2; Constant 5; Measured value 12)
• Inscription (e.g. Working pressure N.O.K.)
8.2.3 "Linked Functions" Window
This window contains the actual CM program. The display can be zoomed in or out
with the scroll bar on the lower edge of the window.
8.2.4 "Functions" Window
This window contains all the functions available for program generation, sorted
according to:
• Data sources
• Calculations
• Numerical operations
• Conditions
• Links
• Boolean operations
• Result values/actions
• Other