HYDAC CSI-F-10 - Manual (Page 63)

GSM Radio Module CSI-F-10 Page 63
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
7.1.5 Managing Configurations
Here you can generate and manage various configuration files. These configuration
files can, for example, be generated in series on a "Master" device and then loaded
on an unlimited number of other CSI-F-10.
The following configuration files can be generated and managed:
• Input values
• Information
• Permissions
• Program
• GSM
• Date / Time
- With Open you can display the contents of a configuration file listed in the lower
display field. Highlight the required file with a mouse click. You can print out the
file in the window that opens automatically.
- With Load you can transfer a configuration file (marked in the lower display field)
from the PC to the CSI-F-10. The following message appears after the
completion of the transfer:
- When you press Save, you generate a new configuration file or save a modified
one to the previously specified target folder.
- Press Delete to delete the configuration file in the target folder highlighted in the
lower display field.
- Press Refresh to update the display field for the configuration files. The specified
target folder will be selected again for this purpose.
This is necessary, e.g. when you copy or delete configuration files using
Windows Explorer. These changes will not be displayed in the folder until after
"Refresh" has been carried out in CMWIN.
- With Display you can display the particular "Actual Configuration" currently in the
connected CSI-F-10.
Selection
target folder