HYDAC CSI-F-10 - Manual (Page 61)

GSM Radio Module CSI-F-10 Page 61
Status 29.01.2009 HYDAC ELECTRONIC GMBH Part.-Nr.: 669752
• Permissions
Number [input telephone number with country code]
Text [allow written access]
You can input up to five telephone numbers which allow connection to the CSI-
F-10 and from which the device may receive enquiry text messages (SMS).
By placing a checkmark in the "Text" box, you are also allowing access by text
to the CSI-F-10 from this telephone number (change settings, transfer CM
program, update firmware, ...)
Click on "Apply", to apply the settings. "Back" takes you back to the main
menu.
Warning!
If no telephone numbers are input here, no subsequent communication via a GSM
mobile radio connection can take place.
7.1.4.2 Information
• General
Supply voltage / V [displays value of supply voltage]
Sensor 'a' [displays type sensor 'a']
Sensor 'b'
[displays type sensor 'b']
Note [input descriptive note]
Write authorization [displays whether programming enable is set]
(see Chap. 6.2 Programming enable)
Click on "Apply", to apply the settings. "Back" takes you back to the main
menu.