INFICON UL5000 Dry Helium Leak Detector - Manual (Page 16)

16
General Information
iina
74
e 0
1
.f
m
te
chn
ica
l ha
nd
boo
k
(1
40
8)
1.4.2 Accessories and Options
The following parts can be ordered additionally:
1.4.2.1 Sniffer line SL200
By use of the sniffer line the UL5000 can easily be converted to a sniffer leak
detector. The length of the sniffer line is 4m (i.e. 12 feet).
1.4.2.2 Toolbox
The toolbox is a detachable compartment with a lockable lid. Fittings and small
fixtures can be stored plus the hand set (See Chapter
1.4.2.5 ). The storage volume
is approximately 5 l.
The toolbox is placed on the working surface and jammed by the handle.
1.4.2.3 Helium Bottle Holder
The helium bottle holder allows you to carry a helium reservoir and a spray gun with
the UL5000. Only small and midsize bottles (max 10 l, 200 bar) will fit without influ-
encing the stability of the UL5000.
1.4.2.4 ESD Mat
This mat is put on the working surface of the UL5000 and is clamped and grounded
by the inlet port ring. It avoids electrical discharges between the working surface and
sensitive test parts.
• Sniffer Line SL200 14005
• Adapter 40 / 25KF (required to connect SL200) 211-283
• Tool Box (detachable) 551-000
• Helium Bottle Holder 551-001
• ESD Mat 551-002
• Remote control in two versions:
– RC1000C wired
– RC1000WL wireless
Extension Cable, 10 m
551-010
551-015
14022
• Spray gun with hose 16555
• Set of plugs 20099024
• Leak Ware (software package) 14090