Trigger level 2, Volume 53, Volume – INFICON UL5000 Dry Helium Leak Detector User Manual
Page 53: Trigger level 2 volume, Apter, 2 trigger level 2, 3 volume
Description of the Menu
53
iina
74
e 0
6
.f
m
te
chn
ica
l ha
nd
boo
k
(1
40
8)
6.4.2
Trigger Level 2
•
>
>
The value of the second trigger level can be set.
See Chapter
for the description of the entry.
If Trigger 2 is exceeded the corresponding relay will switch. This is also indicated at
the display.
6.4.3
Volume
•
>
>
The minimum loudness and the regular volume of the loudspeaker can be adjusted.
The minimum loudness is the minimum speaker volume that cannot be exceeded to
even lower values. Thus it is avoided that the actual volume is accidentally reduced
to a value that is below the noise level of the environment.
The actual volume can be adjusted between 15 (maximum) and the value defined as
minimum loudness.
Softkey 2:
Arrow down
Decrease the minimum loudness. The minimum value is 0.
Softkey 3:
Arrow down
Decrease the actual volume. The minimum value is the value defined under
minimum volume.
Softkey 4:
Beep off / Beep on
Softkey 5:
Help for volume
Help
Softkey 6:
Arrow up
Increase the minimum volume. The maximum value is 15.
Softkey 7:
Arrow up
Increase the regular volume. The maximum value is 15.