INFICON UL5000 Dry Helium Leak Detector - Manual (Page 89)

Maintenance works
89
iina
74
e 0
9
.f
m
te
chn
ica
l ha
nd
boo
k
(1
40
8)
Hinweis This can e. g. be the case if:
• the unit has visible damage,
• fluid has gotten into the device,
• the device is no longer working,
• the device has been stored for an extended period of time under unfavorable
conditions or
after significant moving or transportation stresses.
9.2 INFICON Service
If equipment is returned to INFICON, indicate whether the equipment is free of subs-
tances damaging on health or whether it is contaminated. If it is contaminated also
indicate the nature of the hazard. For this you must use a Declaration of Contami-
nation form
Fig. 1-1 which has been prepared by us which we will provide upon
request or you may copy the form which has been reproduced on the next to the last
page of this handbook.
Please attach this form to the equipment or enclose it with the equipment.
This Declaration of Contamination is required to meet German Law and to protect our
personnel. INFICON must return any equipment without a Declaration of Contami-
nation to the sender’s address.
9.3 Key for Maintenance Schedule
Warning
Presumed Risk:
If it is to be assumed that safe operation is no longer possible, the device is to be
taken out of service and secured against unsupervised operation.
Warning
Oil can damage the environnement. Therefore dispose the oil according to the local
environnement prescriptions.
• I Repair level I Customer
• II Repair level II Customer with technical training
• III Repair level III INFICON service engineer
• X Perform maintenance work after operating hours
• X
1
only operating hours, no limit of time
• 1 depends on environment and application
• 2 depends on process