Access to trigger&alarme menu, Change device pin, Change menu-pin – INFICON UL5000 Dry Helium Leak Detector User Manual
Page 76: Change device pin change menu-pin, To chapter, Is activated you ne, 2 access to trigger&alarme menu, 3 change device pin, 4 change menu-pin
76
Description of the Menu
iina
74
e 0
6
.f
m
te
chn
ica
l ha
nd
boo
k
(1
40
8)
6.8.2
Access to Trigger&Alarme menu
•
>
>
That allows access to this function (see Chapter
) even at a blocked menu access
(see Chapter
).
6.8.3
Change Device PIN
•
>
>
The access to the UL5000 can be restricted by a Device-PIN. If the Device-PIN is not
0000 the UL5000 will ask for this PIN directly after power on. Without device-PIN the
UL5000 does not even switch on the pumps.
Notice: Under all circumstances memorize the PINs! The PIN can only be reset by
INFICON’s service organization.
6.8.4
Change Menu-PIN
•
>
>
The access to the menu can be restricted by entering or changing the personal
identification number (PIN). No PIN will be checked if 0000 is entered.
See Chapter
for the description of the entry.
Notice: Under all circumstances memorize the PINs! The PIN can only be reset by
INFICON’s service organization.