INFICON SQM-242 Thin Film Deposition Controller Card Software Operating Manual - Manual (Page 16)

2 - 2
IP
N 07
4-
55
1-
P1
A
SQS-242 Operating Manual
2.2 Single-Layer Process Setup
We will build a simple single-layer process as an introduction.
2.2.1 Create a New Process
1 Click Edit >> Process.
2 The Process Edit dialog box will display the setup data for the active process.
Click New.. See
Figure 2-1 .
Figure 2-1 Process Edit dialog box
3 Type a new process name using your keyboard, or the on-screen keyboard.
Click Enter to save the new process name. See
Figure 2-2 .
Figure 2-2 Keyboard