INFICON SQM-242 Thin Film Deposition Controller Card Software Operating Manual - Manual (Page 38)

3 - 8
IP
N 07
4-
55
1-
P1
A
SQS-242 Operating Manual
3.5 Edit Menu
3.5.1 Edit: Process
A process is a sequence of thin film layers. Multiple films deposited in the same
layer are known as CoDeposition. The Process Edit dialog box, see
Figure 3-8 ,
provides the functions needed to develop a thin film deposition process from the
database of existing films and materials.
Figure 3-8 Process Edit dialog
Controls along the top of the Process Edit dialog box apply to the entire process:
Process: A dropdown box that selects the process to be edited. Defaults to the
current process. Below the process dropdown, a listing of each layer assigned to
the Process. CoDeposition layers are listed with the same layer number, but a
different output.
Rename: Edits the name of the selected process.
New: Creates a new process. Since every process must have at least one film, the
first film of the currently selected process is used.
Delete: Deletes the selected process from the database. There is no undelete!
Copy: Creates a duplicate of the currently selected process.