INFICON SQM-242 Thin Film Deposition Controller Card Software Operating Manual - Manual (Page 37)

3 - 7
IP
N 07
4-
55
1-
P1
A
SQS-242 Operating Manual
Format: There are two formats for writing data. If Spreadsheet is selected, each
entry is a comma-delimited line of data. If Text is selected, the data is formatted for
easy reading. The first few lines of the LOG file is a heading that illustrates the file
format and content.
NOTE: To use a different delimiter than a comma, change the SQS242.INI file so
that under the [DataLog] section, the LogDelimit= entry shows the
character you want to use. To use a <TAB> character, type the word Tab.
See
section 3.8 on page 3-37 .
3.4.4 File: Print
Print Process: Prints the parameters for the current process to the system printer.
Select Print to File in the Printer Setup Menu to print the data to a file.
Print Setup: Selects and modifies the current system printer.
3.4.5 File: User Login
Displays the User Login dialog box so that a different user may log in. The existing
user is logged off automatically. The user Access Level changes immediately to
that of the new user. See the Edit, Security section for more information on Users,
Passwords, and Access levels.
3.4.6 File: Exit
Exits the SQS-242 deposition control program and saves the current data.