JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 104)

6 Configuration
104
Setup dialog – Process screen – Analog signals
Parameters
The overview pane shows the eight analog signals of the process screen with their current set-
tings. Before changing the settings of an analog signal, select the signal in the overview pane.
Parameter Selection/settings Description
Analog signal 1 to
8 Analog signal that is displayed on the process screen.
Inactive No signal selected.
Module (source of the analog signal) The analog signal of the relevant mod-
ule must be selected in the adjacent
field.
Name analog 1 to
8 Use default name or edit text.
(Max. 16 characters)
Name of the analog signal on the pro-
cess screen
Color analog sig-
nal 1 to 8 Use default color or select another color
from the list (256 colors). Color in which the analog signal is dis-
played on the process screen.
Unit analog signal
1 to 8 Max. 5 characters (%) Unit of the analog signal on the process
screen
Comma anal.
signal 1 to 8 Auto Number of decimal places is selected
automatically.
XXXX. No decimal places
XXX.X One decimal place
XX.XX Two decimal places
X.XXX Three decimal places