JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 14)

1 Introduction
14
Fabrication no. (F-Nr)
Among other things, the fabrication number contains the date of production (year/week).
Example: F-Nr = 0070033801211010006
The figures concerned are in positions 12, 13, 14, and 15 (from the left).
The device was therefore produced in the 1st calendar week of 2011.
1.4.2 Order details
(1) Basic type
705001 Central processing unit (1x Ethernet (RJ45), 1x system bus (RJ45), 1x system bus (E-
Bus), monitoring of 64 limit values)
(2) Basic type extension
0 Standard
(3) Version
8 With factory settings
(4) Interface Com1
00 Not used
51 RS232 Modbus RTU
54 RS422/485 Modbus RTU
(5) Interface Com2
00 Not used
51 RS232 Modbus RTU
54 RS422/485 Modbus RTU
64 PROFIBUS-DP (slave; as of system version 02)
(6) Voltage supply
36 DC 24 V +25/-20 %
(7) Extra codes
000 Without extra code
214 Math/logic function (activation for all connected controller modules)
224 PLC acc. to IEC 61131-3 (CODESYS V3)
225 Program generator 1 to 9
228 Program generator 1 to 9 with process steps (as of system version 02)
(1) (2) (3) (4) (5) (6) (7)
Order code / - - - / , ...
1
1
List extra codes in sequence, separated by a comma.
Order example 705001 / 0 8 - 00 - 00 - 36 / 214