JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 113)

113
8 Configuration – in setup program only
8.1.1 E-mail server
Setup dialog
Parameters
NOTE!
The following settings may only be performed by specialists.
Parameter Selection/settings Description
Authentication Authentication at logon to e-mail server
No No authentication
SMTP-After-POP Authentication with user name and
password on POP3 server
SMTP-Auth Authentication with user name and
password on SMTP server
User name User name (max. 64 characters) for logon to the e-mail server
Your user name
(Example)
Enter name (also applies if Authentica-
tion = no)
Password Password (max. 64 characters) for logon to the e-mail server
Your password
(Example)
Enter password (only for SMTP-After-
POP or SMTP-Auth)
POP3 server Address (URL, max. 64 characters) of the e-mail server for POP3
pop3.example.net
(Example)
Enter server address (only for SMTP-
After-POP)
SMTP server Address (URL, max. 64 characters) of the e-mail server for SMTP
smtp.example.net
(Example)
Enter server address
Mail sender E-mail address (max. 64 characters) as sender address
[email protected]
(Example)
Enter address