JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 131)

131
9 Program editor
Process step
name Process step 01 to 100
Enter name (max. 21 characters) or use
default name.
Free choice of name for the process
step
Use the ">" button to open a window in
which the text can be entered in up to
four national languages.
Enabled setpoints All
Open drop-down menu for disabling or
enabling.
Enabled setpoints can be used in the
program editor.
Only setpoints 1 to 10 are available here
because setpoints 11 and 12 are used
for other purposes (the value of setpoint
12 represents the process step).
Enabled operat-
ing contacts None
Open drop-down menu for disabling or
enabling.
Enabled operating contacts can be used
in the program editor.
Min. section time 00:00:00 to 99:59:59 s Minimum admissible value when enter-
ing the section time in the program edi-
tor
Max. section time 00:00:00 to 99:59:59 s Maximum admissible value when enter-
ing the section time in the program edi-
tor
Assigned genera-
tors None
Select program generator from the drop-
down menu.
The process step is assigned to one or
more program generators and therefore
is available in the program editor.
Parameter Selection/settings Description