JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 96)

6 Configuration
96
6.11.4 Manual mode setpoints
Specific values can be specified for each of the program channels for manual mode. This re-
lates to all setpoint values, the tolerance band, and the 16 operating contacts.
These values are also used if the program generator has been configured as a fixed-setpoint
generator.
Setup dialog
Parameters
Parameter Selection/settings Description
Program channel 1 to 3 (setpoint values and operating contacts in manual mode)
Setpoint 1 -99999 to 0 to +99999 Setpoint value 1
Setpoint 2 -99999 to 0 to +99999 Setpoint value 2
Setpoint 3 -99999 to 0 to +99999 Setpoint value 3
Setpoint 4 -99999 to 0 to +99999 Setpoint value 4
Tolerance min. -99999 to 0 to +99999 Minimum value of the tolerance band
Tolerance max. -99999 to 0 to +99999 Maximum value of the tolerance band
Contact
1 to 16
Not selected (empty) Operating contact not active
Selected (checkmark) Operating contact active