JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 62)

6 Configuration
62
Alarm type and switching differential
Event text
Setup program: Selection of the event text from a list
Click the "..." button to open a list with the text numbers and the associated event texts. The
event texts can be edited.
Multifunction panel: Selection of event texts using the text number
The setup program is required to view and edit the event texts.
6.3.2 Integer variables
64 integer variables are available (integer variables 1 to 64).
Setup dialog
Parameters
(1) (2)
(3) (3)
1
0
(1) Min. alarm/limit value 1 Alarm on
(2) Max. alarm/limit value 0 Alarm off
(3) Switching differential
Parameter Selection/settings Description
Retain Retains the integer value in the event of power off
Not selected (empty) Value is set to 0 after power on.
Selected (checkmark) Value is retained.
Unit Max. 5 characters (%) Unit that is used to display the integer
value.