JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 72)

6 Configuration
72
6.4.1 Alarm
In addition to evaluation of the output signal of limit value monitoring, there is also the option to
make an entry into the event list in the event of an alarm or to form a collective alarm.
Setup dialog
Parameters
Event text
Setup program: selection of the event text from a list
Click the "..." button to open a list with the text numbers and the associated event texts. The
event texts can be edited.
Multifunction panel: selection of event texts using the text number
The setup program is required to view and edit the event texts.
Parameter Selection/settings Description
Alarm type The alarm type is not set by default.
Collective alarm Alarm is used to form the collective
alarm.
Event Alarm results in an entry (event text) in
the event list.
Alarm at level High (1) Alarm at high level (1)
Low (0) Alarm at low level (0)
Event text Use default text or select other text from
the list. Text that is entered in the event list for
an alarm (for "Event" alarm type).
?