JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 92)

6 Configuration
92
End signal 0 to 32767 s Length of the program end signal
Start program Program is started with a digital signal.
Inactive No signal selected.
Module (source of signal) The signal must be selected in the fol-
lowing field (digital selector).
Stop program Program is stopped with a digital signal.
Inactive No signal selected.
Module (source of signal) The signal must be selected in the fol-
lowing field (digital selector).
Abort program Program is aborted with a digital signal.
Inactive No signal selected.
Module (source of signal) The signal must be selected in the fol-
lowing field (digital selector).
Previous section
(version 02)
A digital signal triggers changeover to previous section.
Inactive No signal selected.
Module (source of signal) The signal must be selected in the fol-
lowing field (digital selector).
Next section A digital signal triggers changeover to next section.
Inactive No signal selected.
Module (source of signal) The signal must be selected in the fol-
lowing field (digital selector).
Parameter Selection/settings Description