JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 95)

95
6 Configuration
6.11.3 Basic status setpoints
Specific values can be specified for each of the program channels for when the program is not
running (basic status). This relates to all setpoint values, the tolerance band, and the 16 oper-
ating contacts.
These values are also used if the program generator has been configured as a fixed-setpoint
generator.
Setup dialog
Parameters
Parameter Selection/settings Description
Program channel 1 to 3 (setpoint values and operating contacts in basic status)
Setpoint 1 -99999 to 0 to +99999 Setpoint value 1
Setpoint 2 -99999 to 0 to +99999 Setpoint value 2
Setpoint 3 -99999 to 0 to +99999 Setpoint value 3
Setpoint 4 -99999 to 0 to +99999 Setpoint value 4
Tolerance min. -99999 to 0 to +99999 Minimum value of the tolerance band
Tolerance max. -99999 to 0 to +99999 Maximum value of the tolerance band
Contact
1 to 16
Not selected (empty) Operating contact not active
Selected (checkmark) Operating contact active