JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 118)

8 Configuration – in setup program only
118
8.6 Digital PLC output texts
To make it easier to work with the PLC, the PLC digital outputs (system I/O buffer variables) are
assigned representative names. These names are specified to the CoDeSys programming sys-
tem by the setup program.
Setup dialog
Parameters
Parameter Selection/settings Description
Texts for block 1
to
Texts for block 18
Select a block A block consists of a text for the heading
and up to 32 texts for the outputs.
Some headings and texts are already
specified but can be changed if neces-
sary. For example, block 1 contains the
texts for program generator 1.
Heading Use the ">" button to open a window in
which the text can be entered or edited. Heading in the NV connecting list
Up to four different languages can be
managed (language 1 to 4).
Text output 1
to
Text output 32
Enter text or use text provided (edit if
necessary) Texts for output 1 to output 32
Up to four different languages can be
managed (tab 1 to 4).