Kinze 3140 Stack Fold Planter Rev. 7/14 - Manual (Page 104)

M0245-01 Model 3140
5-24 9/12
TM
KPM III Monitor Operation
Enable Area Counter
• Highlight desired ‘‘Area Counter’’ by turning rotary encoder knob
or using arrow keys.
• Press knob or Enter key. A “Confirm Area Counter Enable” box
displays.
• Use knob or arrow keys to highlight “OK” button and press knob
or Enter key. Enabled ‘‘Area Counter’’ starts accumulating area.
AREA MANAgEMENT
There are 42 area counters: Total Area, Field Area and Area
Counters 1 through 40. Total Area is always active but may be
cleared. If cleared, Field Area is also cleared. Field Area and
Area Counters 1 through 40 may be cleared, started or stopped
separate from each other.
In addition, there is a Lifetime Area Counter (located on Mode
Selection Screen) which can not be disabled or cleared by user.
Press F6 key until ‘‘Area Management’’ screen displays.
NOTE: Total Area counter can never be disabled, but can be
reset to zero (cleared).
• Check mark () in box next to name of area counter indicates
area counter is enabled and accumulating area.
ExAMPLE: In above illustration, 31.3K indicates average
seed population per unit area (either acre or hectare). This
number has been rounded off. Actual seed population
ranges anywhere from 30,500 to 31,499 per unit area. Last
column of numbers is area accumulated (acre or hectare).
• Turn knob or use arrow keys to highlight desired area counter.
• Press F2 key next to Rename to name area. A drop down
keyboard displays. Use keyboard to enter area name. Press knob
or enter key to save information.
NOTE: when a key is dimmed it does not perform any
operation on highlighted area counter. • Use knob or arrow
keys to highlight the “OK” button, press knob or Enter key.
Status
Rename
Clr All
Area Management
Total Area 31.3 K 488.37
Clear
Field Area 31.3 K 488.37
Area Counter 1 31.3 K 486.02
Area Counter 2 0.0 K 0.0
Area Counter 3 0.0 K 0.0
Area Counter 4 0.0 K 0.0
Area Counter 5 0.0 K 0.0
Area Counter 6 0.0 K 0.0
Area Counter 7 0.0 K 0.0
Area Counter 8 0.0 K 0.0
Status
Rename
Clr All
Area Management
Total Area 0.0 K 0.0
Clear
Field Area 0.0 K 0.0
Area Counter 1 0.0 K 0.0 1
Area Counter 2 0.0 K 0.0 2
Area Counter 2 0.0 K 0.0 2
Area Counter 2 0.0 K 0.0 2
Area Counter 2 0.0 K 0.0 2
Area Counter 2 0.0 K 0.0 2
Area Counter 2 0.0 K 0.0 2
Area Counter 2 0.0 K 0.0 2
A B C
I J K
D
L
Q R S T
Z ( Y )
F
M N
G
O
U V W
/ , .
E H
P
X Space
Clear -
Disable Area Counter
All area counters may be disabled, except Total Area Counter.
• Highlight desired ‘‘Area Counter’’ by turning rotary encoder
knob or using arrow keys.
• Press knob or Enter key. A “Confirm Area Counter Disable”
box displays. • Use knob or arrow keys to highlight “OK” button
and press knob or Enter key. Disabled “Area Counter” no longer
accumulates area.
NOTE: Attempts to disable an Area Counter that is planting
will cause the following alarm.
Status
Rename
Clr All
Area Management
Total Area 31.3 K 488.37
Clear
Field Area 31.3 K 488.37
Area Counter 1 31.3 K 486.02
Area Counter 2 0.0 K 0.0
Area Counter 3 0.0 K 0.0
Area Counter 4 0.0 K 0.0
Area Counter 5 0.0 K 0.0
Area Counter 6 0.0 K 0.0
Area Counter 7 0.0 K 0.0
Area Counter 8 0.0 K 0.0
Status
Rename
Clr All
Area Management
Total Area 31.3 K 488.37
Clear
Field Area 31.3 K 488.37
Area Counter 1 31.3 K 486.02
Area Counter 2 0.0 K 0.0
Area Counter 3 0.0 K 0.0
Area Counter 4 0.0 K 0.0
Area Counter 5 0.0 K 0.0
Area Counter 6 0.0 K 0.0
Area Counter 7 0.0 K 0.0
Area Counter 8 0.0 K 0.0
Confirm Area Counter Enable
Enable this area counter?
Cancel OK
Status
Rename
Clr All
Area Management
Total Area 31.3 K 488.37
Clear
Field Area 31.3 K 488.37
Area Counter 1 31.3 K 486.02
Area Counter 2 0.0 K 0.0
Area Counter 3 0.0 K 0.0
Area Counter 4 0.0 K 0.0
Area Counter 5 0.0 K 0.0
Area Counter 6 0.0 K 0.0
Area Counter 7 0.0 K 0.0
Area Counter 8 0.0 K 0.0
Status
Rename
Clr All
Area Management
Total Area 31.3 K 488.37
Clear
Field Area 31.3 K 488.37
Area Counter 1 31.3 K 486.02
Area Counter 2 0.0 K 0.0
Area Counter 3 0.0 K 0.0
Area Counter 4 0.0 K 0.0
Area Counter 5 0.0 K 0.0
Area Counter 6 0.0 K 0.0
Area Counter 7 0.0 K 0.0
Area Counter 8 0.0 K 0.0
Confirm Area Counter Disable
Disable this area counter?
Cancel OK
Status
Clr All
Area Management
Total Area 31.3 K 488.37
Clear
Field Area 31.3 K 488.37
Area Counter 1 31.3 K 486.02
Area Counter 2 0.0 K 0.0
Area Counter 3 0.0 K 0.0
Area Counter 4 0.0 K 0.0
Area Counter 5 0.0 K 0.0
Area Counter 6 0.0 K 0.0
Area Counter 7 0.0 K 0.0
Area Counter 8 0.0 K 0.0
Disable
Note
This counter may not be disabled
as it is currently being displayed
and seeds are being planted.
OK