Monitor key functions -2, Kpm iii monitor operation – Kinze 3140 Stack Fold Planter Rev. 7/14 User Manual

Page 82

Advertising
background image

M0245-01

Model 3140

5-2

9/12

TM

KPM III Monitor Operation

KPM III Monitor Operation

ROTARY ENCODER KNOb

• Turn knob clockwise to increase or

counterclockwise to decrease value of

item.

• Turn knob clockwise to scroll up or

counterclockwise to scroll down.

• Press knob to enter selection.

AV (AUDIO/VIDEO) KEY

• Set alarm volume.

• Adjust the contrast.

• Adjust backlighting of the LCD display.

Can be used at any time.

ACK (ACKNOwLEDgE) KEY

• Used to silence (acknowledge) the

warning alarm when various error

conditions occur.

NOTE: Alarms can be viewed by

pressing the STATUS key.

ARROw KEYS

• UP arrow key is used to move up.

• DOWN arrow key is used to move

down.

• LEFT arrow key is used to move to the

left.

• RIGHT arrow key is used to move to

the right.

PHYSICAL KEYS

• Located on R.H. side of console and

referred to as F1, F2, F3, F4, F5 and

F6

• Keys are referenced in descending

order with F1 at the top and F6 at the

bottom.

ON/OFF KEY

• Powers the unit on and off.

ESC KEY

• Used as the CANCEL (escape) key.

ENTER KEY

• Confirms or accepts the highlighted

selection.

MONITOR KEY FUNCTIONS

Push keys select or change operating mode, active displays,

or the current configuration. Depending on operating mode

or current display selected, some keys may not be active.

Each valid key press is acknowledged by a short beep and an

action is taken. If a key press has no action associated, it is

considered invalid, and there is no feedback.

NOTE: within the LCD, the black box around the smaller

box as shown below indicates which field is selected/

highlighted. Turning the rotary encoder knob or pressing

the UP or DOwN arrow keys moves the black box. when

the black box is positioned on a programmable item, such

as Shaft Sensors, Speed Sensor, Front Row Units or Rear

Row Units, pressing the knob or ENTER key will highlight

the programmable item. A programmable item may only be

changed when it is highlighted.

General Settings

For row spacing enter the smallest spacing between row units

Cancel

OK

Row Spacing

Units of Measure

Area Counters

English

Confirm each enable/disable

15

in

KINZE

ESC

ACK

Physical Keys (F1-F6)

Audio/Video Key

Acknowledge

Arrow Keys

Enter

Escape

Rotary

Encoder

Knob

On/Off

ESC

ACK

Advertising