Kinze 3140 Stack Fold Planter Rev. 7/14 - Manual (Page 11)

TM
Model 3140 M0245-01
9/12 1-5
Specifications
SPECIFICATIONS
Planter Size 12 Row 30" 12 Row 36"/38" 12 Row 38"/40" 16 Row 30"
Width - Transport
(Without Markers) 16'-1" (4.9M) 18'-5" (5.6M) 21'-1" (6.4M) 21'-1" (6.4M)
Width - Transport
(Includes Markers) 17'-9" (5.4M) 19'-6" (5.9M) 22'-2" (6.8M) 23'-0" (7.0M)
Width - Planting 30'-0" (9.1M) 37'-4" (11.4M) 40'-0" (12.2M) 40'-0" (12.2M)
Height - Transport
(Without Markers) 12'-6" (3.8M) 12'-6" (3.8M) 12'-6" (3.8M) 12'-6" (3.8M)
Height - Transport
(With Markers) 15'-6" (4.7M) 15'-6" (4.7M) 15'-6" (4.7M) 15'-6" (4.7M)
Weight (Mechanical) 6236 lb. (2828.6 kg) 6541 lb. (2966.9 kg) 6621 lb. (3003.2 kg) 7480 lb. (3392.9 kg)
Weight (EdgeVac) 6794 lb. (3081.7 kg) 7127 lb. (3232.7 kg) 7214 lb. (3272.2 kg) 8109 lb. (3678.2 kg)
Toolbar (Mechanical) 7" x 7" x ¼" wall 7" x 7" x ¼" wall 7" x 7" x ⅜" wall 7" x 7" x ⅜" wall
Toolbar (EdgeVac) 7" x 7" x ⅜" wall 7" x 7" x ⅜" wall 7" x 7" x ⅜" wall 7" x 7" x ⅜" wall
Seed Capacity 1.75 bu. (EdgeVac/Hopper); 1.90 bu. (Mechanical/Hopper)
Tires Four 7.60" x 15" 8 ply - adjustable height
Drive System Two 4.10" x 6" spring-loaded contact drive tires with no. 40 chain
Seed Transmission Two wheel module-mounted, quick-adjust with machined sprockets and no. 40 chain
Drive/Drill Shafts ⅞ " hex drive/drill shafts
gENERAL INFORMATION
The Model 3110 Mounted Planter is available with EdgeVac or mechanical meters, conventional hoppers, and various
other options. Contact your Kinze dealer for additional options which may be available for your specific model year planter.
Information in this manual was current at time of printing. However, due to Kinze’s ongoing product improvement,
production changes may cause your machine to appear slightly different in detail. Kinze Manufacturing, Inc. reserves the
right to change specifications or design without notice and without incurring obligation to install the same on machines
previously manufactured.
Right hand (R.H.) and left hand (L.H.), as used throughout this manual, are determined by facing in the direction the
machine will travel when in use, unless otherwise stated.