Lenze E94AYCIB - Manual (Page 38)

8 Process data transfer
38
Lenze · E94AYCIB communication module (INTERBUS) · Communication Manual · DMS 4.0 EN · 02/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3. Click the Edit PDO button.
The selection window for editing the process data object is opened:
Here you can transfer the individual ports from the Port Selection list to the receive PDO
"PDO_RX0" by clicking the >> button.
The Up and Down buttons serve to shift the sequence of the ports within the PDOs.
4. Confirm the selection with OK.
5. Repeat the steps 2. to 4. for the transmit object PDO_TX0.
6. Then link the ports to application signals in the technology application selected.
The »FB Editor« can be activated in the multiplexer codes (> C03000), if necessary.
If the »FB Editor« is activated, the multiplexer codes (> C03000) are no longer available. In
this case, you must carry out the interconnection directly in the »FB Editor«.