Lenze E94AYCIB - Manual (Page 49)

Lenze · E94AYCIB communication module (INTERBUS) · Communication Manual · DMS 4.0 EN · 02/2014 · TD17
49
12 Error messages
12.1 Short overview of the INTERBUS error messages
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12 Error messages
This chapter supplements the error list for the Servo Drive 9400 contained in the reference manual
and in the »Engineer« online help with the error messages of the communication module.
12.1 Short overview of the INTERBUS error messages
The following table lists all INTERBUS error messages in the numerical order of the error numbers.
Furthermore, the preset error response and - if available - the parameter for setting the error
response are specified.

Tip!
If you click on the cross-reference in the first column, you will get a detailed description
(causes and remedies) of the corresponding error message.

Reference manual/»Engineer« online help for the Servo Drive 9400
Here you will find general information on diagnostics & fault analysis and on error
messages.
Error number Name Response (Lenze setting) Adjustable in
hex dec
0x00c85531 13129009 INTERBUS: No access to the memory 6: Information -
0x00c85532 13129010 INTERBUS: Error while reading the memory 6: Information -
0x00c85533 13129011 INTERBUS: Error while writing into the memory 6: Information -
0x00c86010 13131792 INTERBUS: Internal error 1: No Response -
0x00c86011 13131793 INTERBUS: Internal error 1: No Response -
0x00c86100 13132032 INTERBUS: Internal error 1: No Response -
0x00c86101 13132033 INTERBUS: Internal error 1: No Response -
0x00c86110 13132048 INTERBUS: Internal mapping error 4: Warning locked -
0x00c8641f 13132831 INTERBUS: Parameter set invalid 1: No Response -
0x00c86420 13132832 INTERBUS: Lenze setting loaded 1: No Response -
0x00c88125 13140261 INTERBUS: Invalid configuration 5: Warning -
0x00c88126 13140262 INTERBUS: Reset of communication 1: No Response -
0x00c88127 13140263 INTERBUS: Invalid initialisation 5: Warning -
0x00c88131 13140273 INTERBUS: Data exchange stopped None C13880/1 /
C14880/1
0x00c88211 13140497 INTERBUS: Received process data length is contradictory 5: Warning -
0x00c88212 13140498 INTERBUS: Process data length to be sent is contradictory 5: Warning -